Our worm gear reducers offer a choice of a good or hollow result shaft and feature an adjustable mounting position. Both the SW-1 and the SW-5, however, can withstand shock loading better than other reduction gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Swiftness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s quickness reducer products – has been serving industry reliably for over 40 years. Its confirmed modular style has set the industry standard for performance and is the most imitated product in the current worm gear velocity reducer marketplace. But why accept a knock-off when you can have the initial – from EP Gear.
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Right angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high insight speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales staff for help determining which gearbox option is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and allow for a corner change with optional dual result. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting options providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The proper angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest procedure of our swiftness reducers. These gearboxes are created to deal with varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size can be available with plastic material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations supply the highest performance and best result torque of most our speed reducers. These gearboxes are designed to handle varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the best choice for constant duty applications. Their gear cluster design provides an effective method for dissipating temperature. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options therefore they work well in environments with limited space. Our parallel shaft gear reducers offer an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, swiftness reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a gear in the kind of a screw, also known as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are considerably smaller than other equipment reduction boxes. A major benefit of worm gear reducers is certainly that they generate an output that is 90° from the insight and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox offers right hand threads; to improve the path of the output, a left-hand thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
Want a lot more info on worm reduction gearbox?