WORM SERVO GEAR REDUCER
Wide range of servo gearboxes, designed to fit almost all servo motors on the market
Designed for the best torsional stiffness and the lowest angular backlash, to get the maximum torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution thanks to a comprehensive selection of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical units) Catalog SR
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the expansion of our range of Servo Reducers, at this point offering five degrees of precision to meet any app requirements. The five levels of precision offered allows a machine designer to select the mandatory reducer precision to meet their needs and their budget. They can be purchased in both in-collection and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Usual applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the entire reducer range to mount virtually any servo electric motor and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
These reducers are usually selected predicated on the peak cycle forces, which usually happen during accelerations and decelerations. These cycle forces rely on the driven load, the acceleration vs. period profile for the routine, and any other exterior forces acting on the axis. For more selection information, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application details will be reviewed by our engineers, who’ll recommend the best solution for the application.
EP Inc. offers a full range of modular servo gearboxes /worm reducers. The modular style permits configurations with motor insight flange and output pinion for rack and pinion drives, and also solid output shafts, Hollow bore output, and input shafts for all other positioning applications. The modular style allows for universal mounting of the gearbox in virtually any orientation.
They can be used on motors with a NEMA23 standard flange via an adaptor kit. As the gears are naturally angled, they result in a short total length of the engine and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a simple and robust design, the series offers gearing ratios that range from 6:1 to 75:1. The user can also customize the components through the order, so as to match the gear to its intended application.
The Precision Planetary Gears of the EPRG series contains a thorough range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with dual shaft, right angle shaft and right angle output, as well as a full selection of adapters for engine mounting, making them capable of meeting the requirements of actually the most varied applications. They are made for use with included servo and stepper EP motors, mounted straight or via adaptor flanges, but may also be used with other EP motor types. This range of products is founded on years of encounter and represents the end result of a decade-long research aimed at improving performance.
Optimum precision and dynamics, combined with outstanding torque density, will be the key requirements specified for reliable servo gearboxes in practice. EP provides servo gearboxes for any program and any efficiency range. Our low-backlash planetary and right-position gearboxes reflect our interest for development and the highest levels of precision.
Worm gear reducers provide market progress solution with efficiency and flexibility. Low number of basic models could be applied to an array of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are made for high-performance mechanical gear. When the motor speed must be reduced, the output torque boosts and send torque totally to the application. We believe that clients will appreciate our equipment reducer to achieve their demand. Just check out EP, you can find more details about servo gearheads, servo gearboxes, and gear reducers. We continue to keep going forward for your support.
Plug the Speed Reducer in to the desired channel of your receiver, and plug the business lead from your servo (or servo wye) into the man servo lead coming from the circuit panel. The arranged screw on the blue trim pot, located close to the top of the primary circuit board, is used to control the acceleration of the servo. Turn the set screw completely clockwise (CW) for regular servo speed with no speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial quickness reduction. The red LED indicates three feasible conditions: Sluggish Blinking = No Signal; Solid On = No Speed Decrease; Fast Blinking = Reduced Speed Setting
Please note that if you make any modify to the speed setting as the receiver is on, you need to cycle capacity to the receiver (convert if off and back again on) for the new speed environment to take impact. This circuit can also be utilized in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposing directions for appropriate function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This device will only work on a normal, proportional servo. You won’t work on a retract-type servo, because they do not acknowledge any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, also by a transmitter which includes this function, as their design and electronics do not allow it. Verify the FAQ page for more information.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you wish to control for a far more scale-like movement of flaps or retracts. Adjustable, it could be set to reduce the swiftness of your servo from super-slow movement to no speed decrease at all, with an almost infinite amount of positions in between. Maximum reduction period for a servo to travel 90 degrees is about 14 seconds, minimum time (no reduction) is simply the normal swiftness of the servo. Great for reducing or eliminating the tendency of a plane to “balloon up” when flaps are deployed. It can be used to control several servo by usage of a regular servo Y.
This is the new regulated version that can be used on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage likely to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding devices, pick and place, and linear slides.Provided in concentric shaft, right angle solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to easily mount to any kind of manufacturer’s servo motor. The EP Series helical gears have got slanted teeth compared to spur gears with directly cut teeth, generating a smoother gear mesh, yielding significantly lower noise levels.
The reduced backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the best possible flexibility and cost-efficiency because not every application requires high-performance components.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, easy output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway
Sight our online servo gear reducer gallery.