Ever-Power Corporation , announces its right position NEMA gearbox designed to IP65 specs for use in clean down applications in packaging apparatus and similar machinery. Rated backlash is definitely 30 arc-minutes with choices 
for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless steel bearings with seals and Nitrile o-rings shaft seals on both input and result. All fasteners are stainless steel. Hard anodized light weight aluminum or 316 Stainless housings can be found. Customizing for other than NEMA motors or your specific application is very easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a great choice to applications that with special space but require low quickness and/or high torque.
Electrical Specification
Manufacturer Part Quantity: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Voltage: 2.7V
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Specifications
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Efficiency: 95%
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Physical Specifications
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Weight: 680g
Replaced by the 3325_0, a motor with the same NEMA size and same torque.
This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It generates 16.2 Kg-cm of torque at 1.68 Amps.
When connected to a 1067 – EP, the 3317 has a maximum rate of just a little over 900 RPM. At the output of the gearbox, the stage angle is just a little under 0.35°. When using the step angle in calculations, you should derive the precise step position by dividing 1.8° by the gearbox reduction ratio.
This specific revision of the 3317 is manufactured by a different producer, but should behave very similarly to the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, maintenance free and will be mounted in virtually any path with their slip fit “O” ring design. Low to high reduction ratios, flange mount or foot mount types, right angle or hollow shaft correct angle types available. Fit NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Speed Reducers
Right-Angle Hypoid Gear Speed Reducers
Product Lineup
Product Features
Allowable Torque
Downloads & Reference
NEMA C-Face Speed Reducers Lineup
Output Power
Gear Type
Input Power
Gear Ratios
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Attach)
1/2 HP
1 HP
2 HP
3 HP
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Mount)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Velocity vary based on input voltage and frequency, please review item specifications for details.
Longer Life
Compared to a spur equipment of around the same pitch diameter, Helical gears can transfer high loads at greater speeds. This is due to the gradual engagement of the teeth and soft transfer of the load.
Helical Gears
Lightweight and Compact
Die cast aluminum gear housings make these quickness reducers light in weight, allowing engineers to create less expensive mounting provisions
Maintenance Free
High-quality synthetic grease can be used in every gearboxes. They are packed at the factory , nor require maintenance filling or level checks. This saves precious time at set up and eliminates concern for expensive oil disposal required by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and double lip spring shaft seals upon both the motor and insight shaft and result shaft driver. Hence, the gear motors could be mounted in any conceivable direction without concern for the positioning of a breather connect.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Spec
Gearing Arrangement:Planetary,Spur
Frame Size:42.6/60/90/115/145 mm
Ratio:3~1000:1
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
Enclosure:IP65
Lubrication:Synthetic Lubricant
Key Features
The Ever-Power EP Series gearboxes include a NEMA output flange with metric shaft, to provide exceptional torque ratings and convenience of many of present servo and stepper movement control applications. The gearboxes are drop-ins for some industry standards and obtainable from one to three levels with ratios 3:1 up to 1000:1, the very best backlash of < 6 arc-mins. Adapters for all servo and stepper motors.
Features:
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash as low as 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, maintenance free
Reliable operating performance, cost effective integration