Downsizing Your System with Greater Energy Chains
HK sort roller chains conform to H variety of ANSI, and their thickness of inner and outer website link plates are equal to people of your upcoming greater dimension chain. Hence, HK kind roller chains are increased in tensile power by about 20%and in maximum allowable load by about 15% than people of conventional roller chains. Because the weight with the chains can also be bigger, HK style roller chains are ideal for the application of hefty duty at very low speed.
Suggested employs
?Optimum for spots the place higher strength is needed but large and heavier chains can not be used.
Collection of chains
Decide on a correct HK style roller chain dependant on “Low-speed selection”
For that maximum allowable load, see the following table of dimensions.
HK variety roller chains are available up to triplex.
Sprockets
Use common sprockets to get a simplex HK roller chain Because the transverse pitches are more substantial than those of normal chains inside the situation of duplex or triplex, standard sprockets are not able to be utilized. Refer for the sprocket tooth profiles for HK
Connecting link and offset hyperlink
The tensile power of connecting back links and offset backlinks are listed around the left, but the maximum allowable load is lower than that from the base chain. Please talk to us really should you have got any queries. It is encouraged to use the connecting link of interference-fitted (FJ, HJ)
By no means make the holes of the connecting plate greater and never make the pins thinner to facilitate the get the job done for fitting the pins in to the connecting plate, because otherwise the fatigue strength will likely be lowered.
Choice of chains
Select a appropriate HK variety roller chain according to “Low-speed selection”
For the maximum allowable load, see the next table of dimensions.
HK kind roller chains can be found as much as triplex.
Sprockets
Use regular sprockets for any simplex HK roller chain Since the transverse pitches are more substantial than people of normal chains within the case of duplex or triplex, standard sprockets can not be employed. Refer to your sprocket tooth profiles for HK
Connecting link and offset website link
The tensile power of connecting back links and offset back links are listed on the left, but the highest allowable load is decrease than that of your base chain. Please consult us should you might have any issues. It’s advisable to use the connecting website link of interference-fitted (FJ, HJ)
Under no circumstances make the holes from the connecting plate bigger and never ever make the pins thinner to facilitate the perform for fitting the pins in to the connecting plate, because otherwise the fatigue strength will probably be lowered.
HK type roller chains
Tags: