The high-end economy lines GSN & GFE combine powerful with economic efficiency: both lines are also equipped with helical ground gears, ensuring the very least noise level and smooth running. The full needle bearing offers been especially designed to reach high torques that beat the competition for devices of the same size. All planetary carriers are produced as a cage made from solid materials. This increases silent operating characteristics while at exactly the same time improving positioning precision and reducing backlash. Yet another shaft sealing ring ensures maximum dust and splash water protection in accordance with protection course IP65 in every lines.
One way to reduce backlash is to use precision gears. The focus on manufacturing in precision gears is usually tighter tolerances, so all around the gear is a tighter, more specific fit. And the tighter match means much less play in the apparatus teeth, which is the cause of backlash in the first place. Of course, precision gears are more costly, if the application demands high accuracy, then precision gearing may be the way to go.
From a gear design perspective, a simple way to reduce backlash is to make sure the teeth mesh tightly together. This is typically done by shortening the center distance between gears. For pre-loading, this could be done using a spring mechanism to carry the gears firmly set up. This also eliminates the play between your gear teeth and thus eliminates backlash.
Of course, the kind of gears used can also have a huge impact on the amount of backlash. So for instance, some gear types such as stress wave gears, or harmonic gear drives, possess zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Due to the lower torque values, the input stage can be dimensionally smaller compared to the output stage. Its short design makes the GSD series the perfect high-end gearbox for space limited applications. The low standard backlash of the GSD collection makes it the perfect fit for highly dynamic applications where highest positioning and rate accuracy is required. The flange output generates highest torsional rigidity. For the lodging of particularly high axial loads, taper roller bearings are optionally available in sizes with 90 mm diameter or higher. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing allows for a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL line provide same advantages as the GSB series; the right angle shape makes the GSBL line an ideal match for all dynamic applications where space is limited.
Intend to find out more regarding worm drive servo? The pleasant group on our web site could aid you out.